Counter Surveillance Probe/Monitor CPM 700

The CPM Countersurveillance Probe/Monitor provides five of the "most desired sweep functions" in one package. R.F. probe "sniffs" your environment for hidden phone, room or body bugs, remote signals, computer, Fax or Telex transmitters, video transmitters, pulsed tracking transmitters, and even wide band frequency hopping or "burst" bugs.

V.L.F. probe tests your A.C. outlets, phone lines, or suspicious wires for very low frequency "carrier current" signs. Auxiliary audio input allows you to listen to telephones or lines for "hotmikes," hookswitch bypass and "infinity" bugs, also unknown wires and cables can be tested for wired microphones. After a sweep, the alarm monitor guards against new devices brought in, remote control activation, or someone tampering with your equipment. The 24-hour "evidence" recording output will store suspicious sounds on a standard cassette recorder while you are away.

UNCOVER HIDDEN DEVICES QUICKLY AND SILENTLY DETECT AND LOCATE all major categories of electronic surveillance, including: • Room, phone, and body bugs that are transmitting your conversations • Video transmitters watching your every move • Vehicle tracking beepers giving away your location • Infinity bugs, hook switch bypass or reversals "turned-on" to your conversations • Wired microphones listening inside a wall • Computer, Fax or Telex transmitters "reading" your information • Tempest leakage. *Even at high security levels where a spectrum analyzer may be employed, the CPM is an invaluable tool for detecting ultra-sophisticated frequency hopping or "burst" bugs.

THE ALARM MONITOR MODE protects you after a sweep by continuously checking for: New devices brought in • Remote control activation • Nearby two-way communications • Phone line tampering.

RECORD ON TAP while you are away, storing evidence on: • Sounds of an eavesdropper installing a bug or tap • Noises of an intruder "snooping" in your office • Unauthorized usage of your equipment.

FEATURES: Rapid detection and location of electronic surveillance devices. Ease of operation, highly effective with limited training. Silent covert detection and location "gives you the advantage". High R.F. sensitivity can locate a bug as low as 1 microwatt. Total spectrum coverage from 200Hz to over 3GHz with no holes or gaps. Active R.F. and V.L.F. probes "pump" signals for lower noise and more sensitivity. Optional probe extensions allow unit to monitor remote locations. Balanced high gain audio input with AGC and filter. "Compressed" bar graph covers 6 ranges. Status display shows operating conditions. Fully adjustable pulsing LCD segment indicates alarm trip point. Selectable silent/tone alarm output. Powered by alkaline or optional nicad battery includes A.C. adaptor/charger. Sweep kit easily fits inside a briefcase. Self-instruction and example tape included. Backed by a 1 year written warranty.

THE CPM-700 Advantages

Cost effective professional sweep equipment at your disposalIncreased security with unannounced sweeps at your discretion
Superior product at an affordable price

Portable Sweep Kit Provides everything needed to perform a professional sweep; sweep kit fits inside a standard briefcase, or optional hard-case.Multi-Functional UtilityThe CPM700 comes with probes to detect RF transmitters (audio and video), carrier current transmitters, and telephone bugs. Probes are also available to detect infrared transmitters, tape recorders, and acoustic leakage.Wideband CoverageFull spectrum coverage from 200 Hz to over 3 GHz including infrared signals.Monitor ModeAfter a sweep, the alarm monitor (silent or audible alert) guards against new devices brought in or the remote control activation of surveillance devices.Auxiliary Audio Input

Allows user to listen to telephones or lines for "hot mikes," hook switch bypass "infinity transmitters" and other telephne bugs. Unknown wires and cables can be tested for wired microphones.

CPM-700 DELUXE PACKAGE

EXPAND THE CAPABILITIES OF YOUR CPM-700

Optional Accessories

MPA-700 Modular Phone Adapter

The MPA-700 Modular Phone Adapter is a "banjo", and you can never have enough of these on a sweep. Gives operator easy access to phone wiring combinations in testing for surveillance devices. This modular adapter allows in-line testing for any plug/jack combination. It includes two 4-pair jacks plus a 152 mm (6 in.) modular cord terminated with a patented 4-pair "universal" plug for accessing any standard 6- or 8-position jack. Individual conductors are broken out by pin number and correspond to eight separate test pads. Test equipment can be securely attached to the test pads using alligator clips. For quick reference in the field, USOC, T568A, and T568B wiring charts are printed right onto the Modapt body. This permits all wire combinations can be checked on both modern single, and multi-pair phone wiring.

CLA-700 Cigarette Lighter

Adapter provides 12 VDC power from automobile socket. Allows user to plug the unit in to vehicle power which is helpful when sweeping an automobile or SUV

NCB-700 Nickel Cadmium (NiCd) Batteries These bateries can be recharged overnight numerous times. The NCB-700 Rechargeable Nickel Cadmium Battery Pack provides a set of NiCad batteries that replace the alkaline batteries. The author's personal preference is to keep several sets of charged NiCads and stand alone charger available, plus several sets of Alkaline or Lithium batteries as well (just in case of extended usage).TRP-700 Tape Recorder Patch CordsThe TRP-700 Tape Recorder Patch Cords allows users to leave a CPM-700 in an area and control a small tape recorder. An added benefit is to use these cable to go into a cam-corder to document the sweep.Optional ProbesIRP-700 Infrared Probe

The IRP-700 Infrared Probe will let users test for IR radiation and related devices. Enables the operator to detect and locate surveillance devices that utilize invisible infrared energy as the transmitting medium. This is a very important accessory to obtain as it is one of the few ways to detect laser based eavesdropping devices, covert video transmitters using IR diodes, some fiber optic systems, and similar devices. The IRP-700 Infrared Probe enables users to detect and locate surveillance devices that utilize invisible infrared energy as the transmitting medium such laser-bounce, IRDA, video senders, video camera illuminators, and so on.

MLP-700 Magnetic Leakage Probe

MLP-700 Magnetic Leakage Probe will allow users to detect magnetic fields (as opposed to electrical fields). Enables the operator to detect and locate magnetic recording devices such as audio or video tape recorders. The Magnetic Leakage Probe is very helpful in finding ELF, VLF, and MF signals, and works very well in locating covert video cameras.

ALP-700 Acoustic Leakage Probe

The ALP-700 Acoustic Leakage Probe is a contact microphone that is used to test for acoustic leakage. The operator can determine the vulnerability of acoustic leakage by placing the ALP-700 against structural objects (i.e. walls, windows).

BMP-1200 Broadband Microwave Probe UpgradeThe Broadband Microwave Probe (BMP-1200) covers 2 GHz to 12 GHz, creating a directional response making locating transmitters easier. The BMP1200 provides enhanced sensitivity over the standard RF probe in the common 2.4 GHz range (video cameras, phones, 802.11 etc.). Includes Acoustic Leakage Probe, Sniffer Probe, and deluxe hard-shell carrying case. The BMP-1200 is backwards compatible with all existing CPM-700 receivers, and provides coverage from 200 Hz to 12 GHz with no holes or gaps. The sniffer probe provides improved detection in RF rich environments where signal saturation may be a problem. The Sniffer probe is a desensitized near-field probe with a detection range from 15 kHz to 3 GHz and is designed to pinpoint bugging devices with a very high level of precision. The deluxe carrying case is a hard shell case with milled foam designed to accommodate the CPM-700 and all accessories including the new probes. Specifications BMP-1200

• Frequency Range: 2-12 GHz Antenna Gain: 7 dB Nominal Sensitivity: -65 dBm (1 segment)
• Audible Sensitivity: -70 dBm M.D.L.

• Frequency Response: 10 MHz - 3 GHz Preamp Gain: 20 dB Nominal Sensitivity: -35 dBm (8 cm from target)
• Audible Sensitivity: -55 dBm (8 cm from target)

• Frequency Response: 50 Hz-10 kHz (Surface Dependant) Sensitivity: Optimized for voice detection
• Impedance: 47K Ohm

One of our most popular and versatile packages is the "CPM-700 Counter Surveillance Probe Monitor Corporate System" which includes various probes and additional items which provide a compact, yet comprehensive system that can fit into a small briefcase. The CPM-700 is very easy to use, and can be operated by non-technical people.

System Includes:

• CPM-700 Counter Surveillance Probe Monitor - Base Unit
• RFP-700 RF Field Probe
• VLF-700 VLF Probe
• -700 Power Adapter
• -700 Example Tape
• -700 TV/VLF Adapter
• -700 Jumper Cable
• -700 Instruction Manual
• -700 Set of Alkaline Batteries
• -700 Headphones

Counter Surveillance Probe/Monitor CPM 700