Quadband Vehicle and Asset GPS Tracker with Built-In Microphone, Vibration Sensor and Magnetic Reed Switch
The SANAV CT-58 IR is an advanced quadband GPS/GSM vehicle and asset tracker, similar in function to the SANAV GC-101-D1F, except that it also includes a built-in vibration sensor and magnetic reed switch, which can be programmed to send out GPS reports when motion is sensed or when the reed switch is opened.
An external panic button ( accessory ) can be connected to the CT-58 IR. When the panic button is pressed, the CT-58 IR will send out SOS reports. The 'IR' firmware has a special feature which adjusts the GPS position update rate dependent on whether the CT-58 IR is stationary or moving. This optimized GPS update rate feature can significantly reduce the number of GPS position updates transmitted over the wireless network when the CT-58 IR is stationary, thereby reducing the wireless carrier data usage.
The CT-58 IR contains flash memory for 'store and forward' data logging which allows the tracker to continue to collect GPS reports even when out of wireless GSM signal coverage. The stored GPS reports are automatically transmitted when the GSM signal is restored. The CT-58 IR offers improved GPS and GSM receiver sensitivity.
The compact and rubust enclosure is rugged and is more suited to long-term installations in vehicles with its increased temperature range. 'Auto-Report', 'Panic SOS', 'Geofence', 'Park/Move' and 'Vibration Sensor' and 'Reed Switch' GPS report trigger modes are supported. A built-in microphone enables remote audio surveillance.
CT-58 IR BOX CONTENTS
* CD with Programming Utility and User Manual
* 110V Mains Charger (USA/CAN) or 220V Mains Charger (Europe) Vehicle
* 12V DC auto cigar charger adapter
FEATURES
* SiRF Star III high performance and low power consumption chipset.
* Quadband Siemens GSM Module.
* High GPS and GSM sensitivity.
* Sends position via SMS or GPRS.
* Programmable dual interval GPS auto report.
* Polling current GPS position in active mode.
* Configuration via the Windows USB Programming Utility or via SMS.
* Built-in vibration sensor and magnetic reed switch.
* Built-in microphone enables one-way audio surveillance.
APPLICATIONS
Workforce Tracking: Field Service Technicians, Couriers, etc.
Vehicle Tracking: Delivery Trucks, Shuttle Buses, Rental Cars, etc.
Asset Tracking: Shipping Containers, Construction Equipment, Heavy Plant, etc.
Personal Safety: Alzheimer Patients, Children, Bail Bond Agents, Security Guards, etc.
GPS RECEIVER
Chipset: SiRFStar III
Datum: WGS-84
Sensitivity: -159dBm
Reacquisition: <2sec
Hot: 10sec typical
Warm: 35sec typical
Cold: 60sec typical
GSM TRANSCEIVER
Frequency: Quadband GSM 850/900/1800/1900 MHz (USA/Europe)
GENERAL
Antenna: Internal GSM antenna and active GPS patch antenna
External Power Supply: 6.0V DC with charging current of 500mA
Battery Power Supply: 3.7V DC
Battery Capacity: 1500mAh Li-Polymer battery
Battery Operation: >40 hours (using 3.7V 1500mAh battery with one report per hour)
Dimension: 8.4(L) x 6.4(W) x 2.3(H) cm (with a 1500mAh battery)
Weight: 104g (including a 1500mA battery)
Relative Humidity: 5% to 95% non-condensing
Environment - Operating Temperature: -20 deg C ~ +70 deg C
Environment - Storage Temperature: -25 deg C ~ +75 deg C