SANAV GX-101-IF(TA) High Performance Quadband GPS Vehicle and Asset Tracker
The SANAV GX-101 iF(TA) is specially designed for permanent installation in vehicles and other high value assets.
The GX-101 iF(TA) uses the Siemens MC-55i Quadband GSM module and an external GM-158 GPS puck receiver (using the MTK-3301 GPS chipset). The GX-101 iF(TA) cast aluminum case is rugged and ideal for automotive environments with wide ranges in operating temperature.
Configurable I/O's are provided for 6 input sensors (e.g. for ignition sensing) and output relays drivers which are compatible with Tyco Bosch 12V SPDT Relays (e.g. to kill the vehicle ignition, sound the horn, etc.)
The "TA" firmware has a special feature which adjusts the GPS position update rate dependent on whether the GX-101 iF(TA) is stationary or moving. This optimized GPS update rate feature can significantly reduce the number of GPS position updates transmitted over the wireless network when the GX-101 iF(TA) is stationary, thereby reducing the wireless carrier data usage.
The GX-101 iF(TA) contains flash memory for 'store and forward' data logging which allows the tracker to continue to collect GPS reports even when out of wireless GSM signal coverage. The stored GPS reports are automatically transmitted when the GSM signal is restored.
GX-101 iF(TA) BOX CONTENTS
• GX-101 iF(TA) GPS Tracker
• GM-158 External GPS Receiver Puck (MTK-3301 Chipset) with 16ft (~5m) Cable
• 12V DC Cable 10ft (~3m)
• CD with Programming Utility and User Manual
Note: The USB-PS2 (RS-232) Programming Cable shown in the image above is available for purchase seperately.
FEATURES
• 20 parallel GPS channel receiver
• Quadband Siemens MC-55i GSM Module
• Data transmission via SMS and GPRS
• HTTP, TCP, UDP, SMTP & SMS transmission modes
• NMEA 0183 GPS Standard GPRMC message format
• 6 Inputs for sensors
• 2 MOSFET Relay Driver Outputs to drive 12V Tyco-Bosch 20-30A SPDT Relays
• Configurable 'Auto-Report', 'Panic-SOS', 'Move-Speed/Park', 'Geofence' and 'DC Power Cut' report modes
• Dual Interval ("TA") GPS Auto Report for Moving and Stationary Modes
• 3 SMS Phone numbers
• 1 SOS Phone number
• 4 buttons (Park, SOS, Accept Incoming call and activate/deactivate all sensor detections)
• Audio monitoring mode (requires external microphone)
• Geofence range with IN and OUT trigger
• Internal 1800 mAh Li-Ion battery
• USB Cable and Software configuration
• -20°C to 70°C operation temp.
• GX-101 settings configuration can be done locally using the Windows Programming Utility application (on CD) and the USB-PS2 adapter cable or remotely via SMS commands.
APPLICATIONS
• Workforce Tracking: Field Service Technicians, Couriers, etc.
• Vehicle Tracking: Delivery Trucks, Shuttle Buses, Rental Cars, etc.
• Asset Tracking: Shipping Containers, Construction Equipment, Heavy Plant, etc.
• Personal Safety: Alzheimer Patients, Children, Bail Bond Agents, Security Guards, etc.
TECHNICAL SPECIFICATIONS
GPS RECEIVER
Chipset: MTK-3301
Datum: WGS-84
Sensitivity: -158dBm
Reacquisition: <0.1sec
Hot: 1sec typical
Warm: 38sec typical
Cold: 42sec typical
Programming Interface Protocol: PS2 (RS-232)
GSM TRANSCEIVER
Frequency: Quadband GSM 850/900/1800/1900 MHz Siemens MC-55i Module
GENERAL
Antenna: External GSM antenna
External Power Supply: 12V ~ 24V DC
Current Consumption: 180mA @ 12V DC
Battery Capacity: 1800mAH Li-ion battery
Dimensions: 105 x 100 x 30mm
I/O's: 6 inputs, 2 outputs
Environment - Operating Temperature: -20 deg C ~ 70 deg C
Environment - Storage Temperature: -20 deg C ~ 70 deg C